Care Instructions - Able 2 PR15341 Instrucciones De Montaje

ASSEMBLY INSTRUCTIONS
A
1. Connect leg support to centre frame.
2. Attach with screws, washers and locknuts and tighten firmly.
3. Insert tension knob and tighten as desired.
4. Check pedal exerciser for balance by making sure that all four non-skid tips touch the floor surface when exerciser is
positioned on the floor surface.
5. If the exerciser is not balanced, (1) check the bolts for tightness, (2) check the alignment of the leg braces, (3) check the
positioning of the non-skid tips.
TIGHTEN ALL BOLTS PERIODICALLY. BOLTS MAY REQUIRE OCCASIONAL TIGHTENING AFTER USE.
THE METAL COMPONENTS ON THE TENSION KNOB MAY BECOME HOT WHEN IN USE.
DO NOT STAND ON THIS PRODUCT. IT IS DESIGNED FOR USE WHILE SITTING IN A CHAIR.
USER INSTRUCTIONS
This product can be used to exercise the legs while sitting in a chair. Place product on the floor at a comfortable distance from the
chair – not too far away to cause stress or overstretching of the legs.
The arms can be exercised by placing the product on a table. User sits in a chair at the table and grasps with hands and rotates
pedals with hands.

CARE INSTRUCTIONS

Wipe with a clean cloth. If product becomes wet, dry immediately with towel to avoid rust.
Aids to daily living
ITEM DESCRIPTION
A Leg Support
B Center Frame
C Tension Knob
B
QTY
2
1
1
C