Pleasant Hearth 24-21-70S Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Stand lower left front panel (L) upright and
stand lower left side panel (K) adjacent to
lower left front panel (L) as shown. Connect
the two panels by inserting three bolts (AA)
through washers (BB), then through predrilled
holes in the side of the lower left front panel
(L) and in the edge of the lower left side panel
(K). Tighten securely. Repeat using lower right
front panel (N) and lower right side panel (M).
2. Lay base (P) on a smooth, flat surface.
Insert 8 dowels in predrilled holes in left and
right sides of base (P). Insert 4 dowels (CC)
into predrilled holes in each end of the front rail
(J). Slip left end of front rail (J) into predrilled
holes in top edge of left front panel assembly
(K/L) until snug. Slip right end of front rail (J)
into predrilled holes in top edge of right front
panel assembly (M/N) until snug. Slip front
panel/rail assembly over dowels until snug.
Secure with bolts (AA) and washers (BB)
inserted through predrilled holes as shown.
3. Insert 8 dowels (CC) into predrilled holes in
top edge of front panel assembly. Slip media
shelf (G) over dowels (CC) until snug. Secure
from beneath using bolts (AA) and washers
(BB) as shown.
1
BB
AA
L
K
2
K
J
L
CC
P
3
G
4
M
N
AA
BB
CC
M
N
CC
BB
AA