Components - Meister i-drill pico 2.0 MAS 36ip2 Traducción De Las Instrucciones De Servicio Originales

MC-5450490-Bedien-0910_b 24.09.10 08:51 Seite 63
Noise emission/vibration
Noise emission
L : 65 dB(A)
PA
L : 76 dB(A)
WA
Measuring inaccuracy:
K : 3 dB(A)
pA
K : 3 dB(A)
wA
Hand/arm vibrations
2
a : 0,32 m/s ;
w
Measuring inaccuracy K: 1,5 m/s
Noise/vibration information
Measured values determined in
accordance with EN 60745-1:2009,
EN 60745-2-2:2003+A11:2007+A1:2009
+A12:2009.
The specified vibration emission value
was determined when carrying out
surface grinding. When used for other
applications, the vibration emission
value may deviate. The specified
vibration emission value was measured
in accordance with a normed test
procedure and can be used in order to
compare one electrical tool with another.
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the power tool. These fluctuations will
depend on the way in which the power
tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is
running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
2
this device. Ensure you carry out
noise-intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute
minimum.
CAUTION! The effects of noise
may cause damage to the
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
3 – Components
1 On/Off switch with integrated light
switch
2 Right/left rotation
3 LED working light
4 Bit holder
5 LED charging and rotational direction
display
6 Screwdriver handle
7 Charger socket
8 Mains adapter
9 Charging plug
10 Charger
11 LED light
63