DEVICE MAINTENANCE AND CONTROLS
General Cleaning of the System
Unplug the device before cleaning.
• General cleaning of the equipment shall be performed by the user
on a daily basis.
• External body cleaning of the equipment shall be performed on a
daily basis with a slightly damp, soft, ripple-free cloth.
• Care must be taken not to let moisture penetrate the interior
surfaces.
• Abrasive cleaning agents should not be used.
ACTIVATED CARBON & HEPA FILTER REPLACEMENT
Unplug the device before starting the filter replacement.
When replacing the filters, personal protective equipment such as protective gloves and mask should be
used. Used filters may contain harmful substances and particles. With misuse, they may escape into the
environment, and risks of illness and patient health may occur. Note that filters should not be disposed of
with household waste. Used filters must always be properly and safely disposed of.
• When the filter change alarms and the lights start flashing, the filter replacement process shall be performed.
The replacement time of the filters varies depending on the frequency of the system and the pollution of the
environment.
• Open the Air inlet covers, if the air inlet covers are dirty, they should be cleaned.
• The HEPA filter shall be removed and a new filter installed. Before replacing the filter, make sure it is
undamaged and dry.
• Reset the filter alarm as described above.
8