Using Your Induction Hob - GIONIEN GIT230SP Manual De Instrucciones

Using your Induction Hob

To start cooking
1. Touch the ON/OFF key(C)"
After power on,the buzzer beeps once,all displays
show "– ",indicating that the induction hob has
entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed,select a relevant
zone select key by pressing the relevant zone select key(A) "
symbol"0",selected will stay fully it.
4. Select the power level by pressing the key (E)"
5. The power level will start at 5.Pressing the "+"will count up the power levels
from 5 to 9 in numerical order.Pressing the "-"key will take the power
straight from 9 to 0
• If you don't choose a heat setting within 1 minute,the induction hob will
automatically switch off.You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
• You have not placed a pan on the correct cooking zone or,
• The pan you're using is not suitable for induction cooking or,
• The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
"for 3 seconds.
alternately with the heat setting
10
".The
" or the key(D)" "