Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions
IMPORTANT! →
It is important to first make sure that your
cushions fit your furniture before opening
the plastic packaging on the compressed
cushion foam. First test out your cushion
cover/case by placing them on your furniture.
YES
1. Using care, cut open the outer plastic bag, then the inner bag.
CAUTION! — U se scissors, NOT a knife or razor blade to open the
bag, taking care not to cut into the inner compression bag, or foam
cushion inside it.
3. Stuff cushion foam into the cushion cover/case while still partially
compressed right after removing from compression plastic wrap.
Pull carefully to avoid ripping the cover/case fabric.
5. Cushion foam may need up to 24 hours to fully expand, readjust
in cushion cover/case before and/or after if needed.
Cushion Installation Tips
c l a s s i c a cce s s o r i e s . co m
CLASSIC ACCESSORIES, LLC, KENT, WA 98032, USA
NO
A. To make stuffing the
cushion foam into the
cushion cover/case easier,
fold the cushion between
your knees and slide the
cover/case over it while
folded. For very large
cushions, get another
person to assist you.
2. Cushion will come out of plastic wrap in partially compressed
state. (May look different than in picture)
4. Pull cushion cover/case fabric together while zipping closed.
6. Adjust length of straps if needed and snap together around frame
of furniture. *Adjustable strap system not featured on all styles.
B. If the fabric does not
rest on the cushion foam
after stuffing as you would
like, try pressing the sides
of it against the edge of a
table to help guide it into its
natural shape.
Publicidad
