E
H
HOW TO USE
E
H
Operating the Dryer
1
H
B
2
H
B
3
4
5
6
MFL70442615_en_190426.indd 37
B
C
A
B
C
A
Clean the Lint Filter
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance.
Lint
Filter
C
Load the Dryer
Load the dryer with the wet laundry from the washer. If the load is extra large,
C
you may need to divide it into smaller loads for proper performance and fabric
care.
Turn On the Dryer
Press the ENCENDIDO/APAGADO (POWER) button to turn on the dryer. The
cycle LEDs will illuminate and a signal will sound, if turned on.
Select a Cycle
Press the Programa(Cylce) buttons until the indicator for the desired cycle is lit.
The preset temperature, dry level, and option settings for that cycle will be
shown. Default settings for the selected cycle can now be changed if desired.
Refer to the Cycle Setting and Options page for details.
NOTE
Not all options or modifiers are available on all cycles. Refer to the Cycle
Guide page for default settings and allowable options. A different chime will
sound and the LED will not come on if the selection is not allowed.
Begin the cycle
Press the INICIO/PAUSA(START/PAUSE) button to begin the cycle. The cycle can
be paused at any time either by opening the door or by pressing the INICIO/
PAUSA(START/PAUSE) button. If the cycle is not restarted within 60 minutes,
the dryer will shut off and the cycle settings will be lost.
End of Cycle
When the cycle is finished, the chime will sound if it is set. Remove
your clothing from the dryer immediately to reduce wrinkling. If Anti
Arrugas(Wrinkle Care) is selected, the dryer will tumble briefly every few
minutes to help prevent wrinkles from setting in the clothes.
37
HOW TO USE
2019.4.26 9:54:42 AM