BlackVue Power Magic Ultra Battery B-124 Manual Del Usuario página 9

e. Insert the fuse you removed from the fuse panel into the slot closest
to the blades on the fuse tap.
f. Insert a new fuse into the slot furthest away from the fuse tap blades.
g. Insert the fuse tap into the empty Switched fuse slot in the fuse panel.
h. Connect the ground wire (ring) to a ground point, such as a bolt, that is
directly on a bare metal part of the vehicle's frame. Secure the ground
wire to the bare metal frame (for example by securing it under the bolt).
i. Set the power switch to the Hardwire position.
3. Plug the 'Output cable' into the port labeled Dashcam on the Ultra Battery.
4. Plug your dashcam's power plug into the cigarette lighter socket on the Ultra Battery's 'Output cable' .
Note
To ensure good electrical contact you can use electrical tape to tape the plug and socket together.
5. Use a pry tool to lift the edges of the windshield trim/molding and tuck in the power cord. Use the supplied Velcro strips to
fix the Ultra Battery in place
Caution
Do not expose the product to direct sunlight and/or heat.
Expansion Dashcam
XT60
OFF
Expansion Dashcam
Cigarette Hardwire DC in
OFF
Cigarette Hardwire
Power Magic Ultra Battery B-124 9
DC