Descargar Imprimir esta página

König Electronic PA-AMP2400-KN Manual De Uso página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
Introduction:
A semi-professional amplifi er series which fi ts standard 19" rack cabinets. This amplifi er is
ideal for starting DJs, who desire excellent product reliability. A built-in cooler takes care of
good ventilation and a peak level indicator gives control over the output level. For maximum
fl exibility there is a choice of various speaker connections like a lockable SPK connector,
binding posts or XLR.
Important information before use:
Keep suffi cient space around the amplifi er to allow adequate air circulation. Also when
mounted in a fl ight case, make sure the airfl ow is not obstructed.
Always switch on the amplifi er after switching on the other equipment and always switch
it off before the other equipment is switched off. If possible with the volume controls set at
minimum, this will avoid annoying and sometimes dangerous signal peaks.
Make sure the amplifi er is switched off when connecting or disconnecting any cables of the
system equipment.
Make sure the amplifi er is also off before disconnecting the power cord from the mains
socket.
The electric system and mains socket have an adequate grounding, compatible with the
safety norms.
Be sure the required voltage for the amplifi er complies with the local voltage of the mains
circuit.
Never connect loudspeakers with a lower resistance (Ohm) as required by the amplifi er (see
specifi cations).
ENGLISH
2

Publicidad

loading