Behringer X AIR XR16 Manual Del Usuario página 33

iPad:
1. Start the Settings/Wifi dialog on
your iOS.
2. Switch 'Wifi' on.
3. Select your X AIR mixer's name
from the list of networks, e.g.
"XR16-19-1B-07". After a couple of
seconds, the status should change
to 'Connected', indicated by a
check mark.
4. Open your X AIR for iPad app and
it will show any X AIR mixers
('Devices') found in that network,
with their IP address, which in this
case is 192.168.1.1.
5. Tap on the mixer's icon to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer firmware is not
supported, it is recommended to
update the firmware to the latest
version (see the XR16/XR12 pages
on behringer.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your X AIR mixer remotely!
PC: X AIR EDIT for Windows,
Mac or Linux
1. Open the Wireless Network
Connections dialog on your
operating system.
2. Make sure the 'WLAN' or 'Wifi'
adapter is switched on.
3. View the list of wireless networks
and select your X AIR mixer's
name, e.g. "XR16-19-1B-07". After
a couple of seconds, the status
should change to 'Connected',
indicated by a check mark.
4. Open your X AIR Editor for Win/
Mac/Linux and click on 'Setup'.
The list will show any X AIR mixers
found in that network, with their
name and IP address, which in this
case is 192.168.1.1.
5. Click on your mixer's name, e.g.
"XR16-19-1B-07", and confirm to
synchronize from mixer to PC in
order to connect the app with your
mixer. If a warning pops up telling
you that the mixer firmware is not
supported, it is recommended to
update the firmware to the latest
version (see the XR16/XR12 pages
on behringer.com for details).
You can, however, choose to
connect anyway.
6. Once the app is connected to
your mixer, all parameters will
be transferred automatically.
Enjoy exploring all mixing
functions of your X AIR mixer
remotely!
33
Quick Start Guide