Frame Preparation - DVO GARNET Guía De Configuración Del Manual Del Propietario

ENGLISH

FRAME PREPARATION

1. Use isopropyl alcohol to clean the lower post body and wipe with
a lint free rag.
2. Make sure the inner seat tube of your frame is wiped clean from
all dirt and debris.
3. Apply a moderate amount of friction paste to inside of the frame's
seat tube to keep the post from slipping when riding.
Using grease will cause the post to slip while riding.
REMOTE LEVER INSTALLATION
Install the remote lever onto your handlebar. Do not exceed 2-3 Nm's of torque.
Make sure to check for clearance between the remote lever and any brake or
shifter controls.
Note: The remote lever can be used on either side of the handlebar. Refer to the
handlebar manufacturer's instructions for use on carbon bars.
8
WARNING!
Do Not Use Grease!
GARNET DROPPER OWNER'S MANUAL & SET UP GUIDE