Lampa 74503 Manual Del Usuario página 9

OK
UP
Stick the sensor horizzontally
The sensor must be mounted vertically, never be overigh or overlow
OK
90°
The hole should be in
orizzontal, placed on
the bumper.
NO
NO
B
A
Fix the sensor posi-
tion with an awl to
prevent the electric
drill slipping away.
NO
D
C
Drill a hole on the po-
sition with a electric
drill.
NO
Deciding the mounting
position, make sure there are
no obstacles around the
angle of 90°, otherwise
the detecting results may
be effected and cause false
alarms.
Install the sensor into
the hole and block
firmly with clip slice
(supplied)
GB
NO