The Carry Cot - Mutsy EVO Manual De Instrucciones

Ocultar thumbs Ver también para EVO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 71
The push bar (c)
· Push the buttons on both sides of the push bar and turn the push bar
upwards.
· The push bar has 4 different height positions. Release the buttons
when the push bar is in the desired position.
The carry cot (up to 9 kg)
· The carry cot is suitable for transporting children from birth up to 9 kg
in a lying position. The carry cot is not suitable for children who can sit
or roll independently or who can raise themselves on their hands and
knees.
· You can also use the carry cot separately from the frame.
· Regularly check the bottom, the edges and the carry straps on the carry
cot for signs of wear and tear.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the carry cot adapters (j)
· There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
· The adapter marked with 'R' is placed on the right side of the frame, the
adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the carry cot (k)
· Orientate the carry cot such that it is directed rearwards on the frame.
· Hold the carry cot by the handles on both sides of the cot and place
directly above the adapters.
· Slide the carry cot over the adapters and press solidly until you hear a
click on both sides.
· Check that the carry cot has been placed horizontally and has been at-
tached properly by trying to lift it from the frame.
Remove the carry cot (l)
· Hold the carry cot by the handles on both sides of the cot. Press and
hold the unlock buttons.
· Lift the carry cot in vertical direction of the adapters.
Remove the carry cot adapters (m)
· Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.
EN
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Evo2

Tabla de contenido