USING THE APPLIANCE
• Take your appliance out of its box.
• Wipe the body of the appliance with a damp cloth.
• Clean the tray and mesh grill of your appliance throughly.
• Fill the lower surface of the dripping tray with water as desired.
Warning: The height of water you will fill in your appliance should not exceed the resistance
entrance port on the tray.
• Adjust the thermostat on the power cord to the appropriate stage according to the
cooking duration of the food you will cook, and turn on your appliance by plugging it in.
• Place your food on the grill.
• Turn your food over occasionally as you cook.
• Take your food off the grill when cooked.
• For best results, take the excessive fat on the grill with a paper towel between grills.
Note: Smoke might be emanated from the heating resistance during first use; this is
normal.
Warning: When turning off your appliance, unplug the plug first, and not the adapter.
CLEANING AND MAINTENANCE
• Bring the On/Off switch to '0' position.
• Unplug the appliance and wait for it to cool down.
• Take the excessive fat on the grill with paper towel.
• Remove the resistance unit.
• Remove the dripping tray from the base.
• Wipe the resistance unit with a damp cloth.
• Clean the grill and dripping tray with a soft cloth or sponge under hot water with
dishwashing detergent. You can wash your dripping tray on dishwasher as well.
• Reassemble the appliance after the parts dry.
ENVIRONMENT FRIENDLY DISPOSAL
You can also contribute to environmental protection!
Please do not forget to adhere to local regulations.
Take the non-operational electrical appliance to the suitable disposal centers.
There is no situation that might harm human health or the environment during use.
- 10 -