Technical Data; Cleaning And Maintenance - Sinbo SHC 4369 Manual De Instrucciones

• Recharging time 8 hours, operation time 45mins
To recharge the grooming set, to let adaptor connected with main body in connection of
adaptor position (at the bottom of main body), then insert the adaptor to power. The LED
lights up during recharging

TECHNICAL DATA

- Power: 3W
- Battery: 1XAA 800MA
- Rated Voltage: AC230V, 50Hz
- Adaptor output: 3V300MA
- Charging Time: about 8 hours
- Working time: 45mins
Usage
There are 5 changeable heads for choose.
1) Full size of hair trimmer head is for hair/beard trimming.
Always comb your hair/beard before starting.
Select comb attachment which one the cutting length you want then put it on.
There are 4pcs comb attachments, the cutting length is 3mm / 6mm / 9mm / 12mm.
Put on the switch, cut your hair by gliding the appliance in the direction of growth.
It is better to cut a little longer than what your want firstly.
For final precise trimming, please remove the comb attachment, adjust the blade's
cutting length. The button of blade adjustment is for this function, the cutting length is
2) Precise hair trimmer head, there is 1pc comb attachment, cutting length is 4,5,6,7
mm.
3) Specific hair trimmer head
4) Nose trimmer head
Turn on the switch and carefully insert the tip of the outer blade into your nostril or an
ear hole to trim the nose and ears hairs.
5) Shaver head
Turn on the switch hold the groomer so the shaver gently touches your face in a 45 degree
angle. It's better to keep the skin clean and dry.

CLEANING AND MAINTENANCE

Before cleaning the grooming set, check that it is switched off and unplugged.
1. Remove all accessories.
2. Use brush to cleaning the hairs on the heads.
3. Never immerse the appliance in water. Clean the body of grooming set with a slightly
moist soft cloth.
4. After cleaning, lubricate with 2/3 drops lubricating oil to the blades.
- 6 -