Cleaning And Maintenance - Sinbo SMX 2737 Manual De Instrucciones

1. Align the hole below the back of the hand mixer with the tuber on top of base, then press
down vertically with a little force. Make sure it is assembled correctly (Fig.1). For detaching the
hand mixer, push the hand mixer in the arrow indicated direction (Fig.2). Hold the head of mixer
to tilt position and pressing the base switch (Fig.3).
2. Choose the proper attachments based on the task to be performed and assemble it in position.
Beaters are for mixing egg white or mixing other liquid. Dough hooks are for kneading the
dough.
Note: Beaters and dough hooks, the one with gear can only be inserted into the socket with
graphics and the other one can only be inserted into the other socket. The two beaters and two
dough hooks cannot be inserted in reverse.
3. Place the food that need blend into bowl, then place the bowl on position.
4. Lower down the head of mixer and pressing the base switch (Fig.4).
5. Ensure that the unit is at the 0 setting, then connect to power supply.
6. Dial the speed selector to your desired setting and the appliance will start working. There
are 5 settings and the speed will achieve the highest if the turbo button is depressed at any
time.
Warning: Do not place knife, metal spoon, fork and so on into bowl when operating.
7. The max operation time per time shall not exceed 5 minutes, then have a rest for 10 minutes,
When kneading yeast dough, we suggest that the speed selector should be at low speed firstly
and then use high speed to achieve the best result.
Note: During operation you may turn bowl with hand to achieve the best results.
8. When mixing is completed, turn the speed selector to 0 position, unplug the cord from power
outlet.
9. If necessary you can scrape the excess food particles from the beaters or dough hooks by a
spatula.
10. Lift the head of mixer, hold the beaters/dough hooks with one hand and press the ejector
button firmly down with other hand, remove the beaters/dough hooks.
Note: Remove the beaters/dough hooks only at the 0 setting.
11. The hand mixer can be used separately without the base in position.
12. Do not operate the appliance for other than its intended use.
13. Save these instructions.

CLEANING AND MAINTENANCE

1. Unplug the appliance and wait it completely cool down before cleaning.
Caution: the mixer cannot be immersed in water or other liquid.
2. Wipe over the outside surface of the head and Base with a dampened cloth and polish with
- 8 -