Style selections 7360ALMV Manual De Instrucciones

Style Selections is a trademarkof LF, LLC. All Rights Reserved.
Suction Mount Option:
IMPORTANT:
• Thoroughly clean the mounting surface and suction cups with a mild household cleaner, rinse thoroughly with water, and allow to fully dry.
• Do not use suction cups on porous or textured surfaces because they will not function properly.
• Suction cups are movable to avoid positioning over any grout lines.
1. Remove the protective cover from the suction cup.
2. Rotate knob COUNTER CLOCKWISE until loose, fig 1. NOTE: If you accidentally removed knob, re-attach with 2 turns.
3. With the item in its final location, PRESS FIRMLY against the mounting surface WHILE TURNING THE KNOB CLOCKWISE until fully tight, fig 2.
NOTE: To remove, turn the knob COUNTER CLOCKWISE until completely loose.
NOTE: Occasional cleaning of the suction cups and the wall surface will ensure maximum performance.
Having issues?
• Are the surfaces clean and dry? Clean with mild household cleaner, rinse thoroughly with water and allow to fully dry.
• Was the knob fully loosened prior to mounting? Turn knob counter clockwise.
• Did you press firmly against wall while tightening knob clockwise? Maintain pressure while turning knob.
• Are your walls textured? Works on flat, smooth surfaces only.
• Are you mounting over a grout line? Reposition suction cup on center of surface.
• Installation video link. https://www.zenith-products.com/org-dual-mount-installation-video
Adhesive Mount Option:
IMPORTANT:
• Thoroughly clean the mounting surface with a mild household cleaner, rinse thoroughly with water, and allow to fully dry.
• Avoid positioning adhesive pads over any grout lines.
1. Turn knob COUNTER CLOCKWISE and
remove the suction cup from the item.
4. Remove assembly and
firmly press down the adhesive pad
to remove air bubbles.
CRITICAL
STEP
Having issues? Please don't return to store. Call our customer care line for help 1-866-389-8827.
Installation video link. https://www.zenith-products.com/org-dual-mount-installation-video
IS7300-I
Fig. 1
Please don't return to store. Call our customer care line for help 1-866-389-8827.
2. Insert the adhesive pad and
re-attach the assembly and
5. Re-attach the assembly to the
CRITICAL
STEP
ITEM
MODEL # 7360ALMV, 7361ALMV, 7362ALMV, 7364ALMV
Fig. 2
turn knob 2 turns.
adhesive pad.
1
#1599753, 1599757, 0889518, 1599760
3. Remove the plastic backing from
the adhesive pad and firmly press
against the mounting surface.
6. Turn the knob CLOCKWISE until snug.
DO NOT OVERTIGHTEN!