Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
DELUXE
POCKET HOLE
JIG KIT
#850
INSTRU TIONS
Please read these instructions carefully
and thoroughly before using this product.
Safety Instructions:
1. Always use eye protection when
using power tools. Wear safety
goggles that comply with ANSI 287.1.
2.
Always unplug drill from
WARNING:
power supply when changing bits and
attaching drill stops.
Helpful Tips:
This pocket hole jig will accept work
1.
pieces up to 1-1/2" thick.
It is always best to practice making
2.
pocket holes on scrap pieces of wood
to familiarize yourself with the tool.
The jig is equipped with mounting
3.
holes for easy attachment to a fixed
work surface.
Pocket hole joinery requires drilling
4.
pocket holes in only one of the two
pieces to be joined.
PHONE (212) 431 - 6100 FAX (212) 431 - 6499 TOLL FREE (800) 697-8665
©2019 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
GENERAL TOOLS & INSTRUMENTS
75 Seaview Drive, Secaucus, NJ 07094
e-mail: sales@generaltools.com www.generaltools.com
#850 Instructions Specifications subject to change without notice
Before you get started:
The table below lists all the parts
included in the Pocket Hole Jig Kit.
Parts List:
ITEM # DESCRIPTION
1
Jig with screw clamp
2
Step Drill Bit, 3/8"
3
Stop Collar
4
Hex Wrench
5
#2 x 6" Square Drive Bit
6
#2 x 1" Fine
Wood Screws
7
#2 x 1" Course
Wood Screws
8
3/8" Wood Pocket Hole Plugs 24
#850 3/07/19
QUANTITY
PATENT
#6,254,320
1
1
1
1
1
24
24
Publicidad
Manuales relacionados para General 850
Resumen de contenidos para General 850
- Página 1 PHONE (212) 431 - 6100 FAX (212) 431 - 6499 TOLL FREE (800) 697-8665 e-mail: sales@generaltools.com www.generaltools.com #850 Instructions Specifications subject to change without notice ©2019 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. #850 3/07/19...
- Página 2 Instructions: 1. Ensure that the stop collar on the step drill bit is positioned at the correct height on the step drill to prevent drilling into the jig base (see Figure 1). Use the included hex wrench to loosen/tighten the stop collar. 2.
- Página 3 EQUIPO DE LUJO PORTATIL PARA TALADRAR #850 INSTRU IONES Lea Completamente Las Instrucciones Antes de Utilizar Esta Plantilla Instrucciones de seguridad: 3. La amortajadora tiene orificios para facilitar su 1. Siempre use protección ocular cuando opere montaje a una superficie de trabajo fija.
- Página 4 TROUSSE DE LUXE POUR GABARIT DE TROUS #850 INSTRU TIONS Veuillez Lire Attentivement Ces Instructions Avant D'utiliser ce Gabarit. Mesures de sécurité : 4. Avec un gabarit de perçage à angle, il faut percer un 1. Portez toujours des articles de protection des yeux trou à...