Soundcore Life P2 Manual Del Usuario página 3

LED behaviour (Earbuds)
Flashing white
Steady white for 1 second
In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-
Secondary dual pairing names, it may notice "connection unsuccessful" when you tap "Pair"
or even no screen popped out. Don't worry and it will not influence the using.
Once successfully paired, the primary earbud connects with your device and transfers signal
to the secondary earbud, the latter one will not connect with your device. As a result, in the
Bluetooth pairing list on your device, it may indicate that only one side is connected while the
other side is not.
• To pair with another Bluetooth device, turn off Bluetooth on the currently connected
device first.
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the ear tips that fit your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and find the most comfortable position.
03 EN
Bluetooth Pairing Request
"Headset" would like
Soundcore to pair with your iPhone
Cancel Pair
Life P2
Bluetooth pairing
Bluetooth connected
Controls
Pair
Play / Pause
Next track
Previous track
Volume up / down
Answer / End a call
Reject a call
Enable mono mode
Activate Siri or other voice
assistant software
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3
times and then turn white.
All the memory data will be cleared.
Press (R/L)
1
R\L
Press twice (R)
2
R
Press twice (L)
2
L
Control volume via the connected device
Press (R/L)
1
R\L
Press and hold for 1 second (R/L)
1"
R\L
Remove either one of the earbuds off your ear and press and hold
the button on the other earbud for 1 second
Press and hold for 1 second (R/L)
Voice Assistant
1"
R\L
EN 04