Changing The Batteries; Care And Storage - Beurer JBY 86 Instrucciones Para El Uso

7. Settings
Noise sensitivity
Push the switch for microphone sensitivity
('Sensitivity') up or down in order to set the
desired noise sensitivity. If you have it set
to high sensitivity, the baby unit transmits
all noises.
Volume
Push the volume control ('Volume') up or
down in order to increase or reduce the
receiver volume on the parent unit.
8. Useful information about
the baby monitor
• Position the receiver and transmitter
upright in order to ensure optimal trans-
mission quality.
• Battery operation of the baby monitor
minimises electrosmog from electrical
and magnetic alternating fields.
• You can increase the range of the baby
monitor by positioning the baby unit as
high up as possible near a door or win-
dow and ensuring that the batteries are
not too weak.
• Other radio waves can interfere with the
transmission of the baby monitor. There-
fore, do not position the baby monitor near
devices such as microwaves, WLAN etc.
The following other factors can interfere with
the baby monitor's transmission or shorten
its range: Furniture, walls, houses, trees,
environmental factors (such as fog, rain).

9. Changing the batteries

The devices have a battery level indicator
in the display. If the batteries are too weak,
the devices switch off automatically and you
should change the batteries.
Note
When changing the batteries, use batteries
of the same type, make and capacity. Always
change all batteries at the same time. Use
batteries free from heavy metals.

10. Care and storage

The service life of the device depends on its
careful handling:
CAUTION
• Remove the batteries if the device is not
in use for an extended period.
• Protect the devices from knocks, damp,
dust, chemicals, drastic changes in tem-
18