BenQ treVolo 2 Manual Del Usuario página 4

English
Buttons & connectors
A. Sound mode
(Phone hang up)
B. Volume up
C. Volume down
D. Play/pause
(Answer)
Pairing and connecting Bluetooth
1. Have the power adaptor plugged in. Press and hold the power button for 3
seconds. The circle of power button will blink quickly and the device will be
in pairing mode.
2. When the power is on but the device is not in use for about 2 minutes, the
power button light will go back to power indicator. Press and hold the Blu-
®
etooth
of power button will blink in blue and green.
3.
Turn on Bluetooth
treVolo 2 XXXX".
4. Flip out both speaker panes and enjoy your music.
5. If the paired device comes with phone feature, BenQ treVolo 2 will
become a speakerphone. To answer incoming calls, press play/pause button.
To hang up, press mode button.
treVolo 2 can paired with another treVolo 2 to perform Duo mode. See more information on the
user manual.
Power Button Indicator Rules
• The circle of power button is lit in blue with 81% or more of remaining power, in
green with 80%~31% of power, and in red with 30% or less of power.
• The circle of power button also indicates sound mode of pure in green, of warm
in red, and of vivid in blue. The power button indicators mentioned above all flash
for about 5 seconds. Then it goes back to the existing power indicator.
E.
F.
G.
H.
button for 3 seconds to make the speaker discoverable. The circle
®
of your device to discover and pair with "BenQ
LED indicator
Power
®
Bluetooth
Micro USB port
I. Line-in jack
J. Line-out jack
K. Power charger-in
jack
®
devices