Indel Webasto Marine isotherm White Instrucciones Para La Instalación Y El Uso página 7

ENGLISH - Warnings
WARNING! This product must not be used outdoors and must not be placed
in damp environments with the presence of water jets.
It must be at least 5cm from the side walls.
WARNING! This product must be supplied only with cold water approved
for human consumption (drinking water). The operating pressure shall be between
100 KPa (1bar) and 600 KPa (6bar).
WARNING! Never turn off the water supply tap while the product is in
operation.
WARNING! Before connecting the product to the power supply, make sure
that the mains voltage corresponds to that indicated on the data plate.
WARNING! Make sure that the product is connected to an effective
grounding system.
WARNING! Check that the electrical flow rate of the system is adequate for
the maximum power of the product indicated on the data plate.
WARNING! For a correct and safe installation of the product, it is essential to
prepare a special socket controlled by an omnipolar switch with an opening distance
of the contacts that is equal to or greater than 3mm, in compliance with current
national safety standards, equipped with fuses, with associated differential and
positioned in such a way as to be easily accessible.
WARNING! It is advisable to unroll the entire length of the power cable,
making sure it does not get crushed in any way.
7