Publicidad
English
Operation Instructions
1. Switching PowerBeat On/Off
• To turn on PowerBeat, press and hold the Multi-Function Button on both earpieces
for about 3 seconds until the Blue LED is on.
• To turn off PowerBeat manually, press and hold the Multi-Function Button on both
earpieces for about 4 seconds.
• The earpieces turn off automatically when placed in the charging box.
2. Pairing PowerBeat
• Before connecting PowerBeat to your device, make sure that PowerBeat is in pairing
mode.
• To enter pairing mode, press and hold the Multi-Function Button on one of the
earpieces for 8 seconds, until Red and Blue LED start flashing alternatively.
• Turn on the Bluetooth function of the device you wish to connect and search for
"PowerBeat". From the list of found devices, select "PowerBeat".
• PowerBeat is now connected to your device.
3. Call Function
• Answering a Call: Press the Multi-Function Button on the left earpiece once to answer
an incoming call.
• Ending a Call: Press the Multi-Function Button on the left earpiece once to end an
ongoing call.
4. Charging PowerBeat Earphones & Charging Case
• PowerBeat's charging case has a built-in battery.
• To charge the charging case, plug one end of the charging cable into PowerBeat
charging case charging input and the other end into a USB Power Adapter or a Laptop/Desktop.
• The blue LED on the charging case starts to flash to indicate that the charging case
is charging. The charging case is fully charged when all of 4 blue LED lights on.
• Place the earpieces into the charging case to charge the earpieces.
• The red LED indicator on the headset turns on to indicate that the headset is charging
normally and will turn off once fully charged.
4
Publicidad
