Technical Parameters; Rating Data - GRAPHITE PRO 59GP401 Manual De Instrucciones

In the event of excessive sparking of the commutator, have the condition of the carbon brushes of the
motor checked by a qualified person.
Always store the drill/driver in a dry place inaccessible to children.
REPLACEMENT OF THE CHUCK
The chuck is screwed onto the thread of the spindle and also secured with a screw.
Set the rotation direction switch (5) in the central position.
Open the jaws of the chuck (1) and unscrew the fixing screw (left-hand thread) (fig. H).
Put an Allen key in the chuck and gently tap the other end of the key.
Unscrew the chuck.
In order to install the chuck, perform the above actions in a reverse order.
Any and all defects must be removed by service companies authorized by the manufacturer.

RATING DATA

Parameter
Battery voltage
Battery type
Battery capacity
USB Power Bank
Range of idle rotational speed
Impact speed on idle
Range of chuck
Range of torque control
Max. torque (soft drive)
Max. torque (hard drive)
Protection class
Weight
Year of manufacture
Parameter
Supply voltage
Supply current frequency
Charging voltage
Max. charging current
Charging time
Protection class
Weight
Year of manufacture

TECHNICAL PARAMETERS

Cordless drill/driver
gear I
gear II
gear I
gear II
Charger
25
Value
18 V DC
Li-Ion
2500 mAh
5 V DC (1A)
-1
0-400 min
-1
0-1500 min
-1
0-6000 min
0-22500 min -1
1,5-13 mm
1–18 + drilling, impact drilling
40 Nm
68 Nm
III
1,6 kg
2016
Value
230 V AC
50 Hz
21 V DC
2500 mA
1 h
II
0,58 kg
2016