Installation Instructions - FULTON PRO Serie Instrucciones De Instalación

Step 2: Mount the Receiver
The receiver should be mounted in a clear and dry location.
Mount on a flat surface with at least 2 fasteners (not included) through
the 7 mm mounting holes on each side of the receiver.
III. Operation
1. Install battery.
a. Remove the three screws from the wireless transmitter.
b. Separate the top section, insert the battery positive (+) side up and replace the top section.
c. Replace the three screws.
2. Start
a. Press the Power Button for 5 seconds until the Green light comes on.
b. Press the In/Down or Out/Up button. The Red indicator light will come on.
Power Button
Cable IN/
Jack Down
Installation Instr uctions
LED Indicator
Cable OUT/
Jack Up
Minimum of one mounting fastener each side
Operation
Lithium Battery: CR2032 (3V)
Cable IN
Cable OUT
Jack Up or Down
F3867 (revA-3709) 1/15