Publicidad
Power LED Header
(3-pin PLED1)
(see p.2 No. 30)
Chassis, Power and SB Fan Connectors
(4-pin CHA_FAN1)
(see p.2 No. 23)
(3-pin CHA_FAN2)
(see p.2 No. 24)
(3-pin CHA_FAN3)
(see p.2 No. 32)
(3-pin PWR_FAN1)
(see p.2 No. 1)
(3-pin SB_FAN1)
(see p.2 No. 18)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.12 No. 9)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
(3-pin CPU_FAN2)
(see p.12 No. 8)
ASRock X79 Extreme6/GB / X79 Extreme6 Motherboard
Please connect the chassis
1
power LED to this header to
PLED-
PLED+
indicate system power status.
PLED+
The LED is on when the system
is operating. The LED keeps
blinking in S1 state. The LED is
off in S3/S4 state or S5 state
(power off).
Please connect the fan cables
to the fan connectors and
GND
+12V
match the black wire to the
CHA_FAN_SPEED
FAN_SPEED_CONTROL
ground pin. CHA_FAN1,
, CHA_FAN2 and
GND
+12V
CHA_FAN3 support FAN
CHA_FAN_SPEED
control. SB_FAN1 supports
supports Quiet FAN.
GND
+12V
PWR_FAN_SPEED
GND
+12V
SB_FAN_SPEED
Please connect the CPU fan
FAN_SPEED_CONTROL
CPU_FAN_SPEED
cable to the connector and
+12V
GND
match the black wire to the
ground pin.
1 2 3 4
Pin 1-3 Connected
3-Pin Fan Installation
GND
+12V
CPU_FAN_SPEED
49
Publicidad
