Maintenance; Cleaning The Unit; Specifications - Sharp DK-AP7N Manual De Manejo

Maintenance

■ Cleaning the unit

Periodically wipe the unit with a clean soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.).
It may damage the unit finishing.
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
■ General
Power source DC IN 6V
(AC 100 - 240 V ~ 50/60 Hz)
DC IN 6V
HP-7) battery x 4]
Power Power on: 5 W
consumption
Power stand-by: 0.6 W(*)
Output power Front speakers:
PMPO: 6.08 W
MPO: 3.04 W (1.52 W + 1.52 W) (10% T.H.D.)
RMS: 2.4 W (1.2 W + 1.2 W) (10% T.H.D.)
RMS: 2.08 W (1.04 W + 1.04 W) (1% T.H.D.)
Subwoofer:
MPO: 2.23 W (10% T.H.D.)
RMS: 2 W (10% T.H.D.)
RMS: 1.6 W (1% T.H.D.)
2A: AC/DC adaptor
[ "AA" size (UM/SUM-3, R6 or
Speaker 2.1-way type speaker system
Front speaker: 3.0 cm (1-1/8")
Subwoofer: 4.6 cm (1-3/4")
Speaker maximum Front speaker: 2.0 W/Channel
Subwoofer: 4 W
input power
Speaker rated Front speaker: 1.2 W/Channel
input power Subwoofer: 2 W
Output terminals Video output: 1Vp-p
Input terminals Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions Width: 198 mm (7-4/5")
Height: 69.8 mm (2-7/10")
Depth: 77 mm (3")
Weight 0.59 kg (1.3 lbs.)
(*) This power consumption value is obtained when in the power
stand-by mode.
DK-AP7N(R)
DK-AP7N(S)
DK-AP7N(W)
ENGLISH
E-12