Feiss WB1771 Manual Del Usuario

Installation Instructions for
Colorado Springs 1 Light Wall
Wall
G ENERAL RODUCT NFORMATION P
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
1
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
2
Install the shade onto the fixture bracket by inserting the shade peg into the notch.
3
I :
PEG
LAMP
NOTCH
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
SHADE
3
2
BRACKET
1
WB1771
WB1771
1.1