Special Functions • Fonctions Spéciales - Phonocar 04070 Diagramas De Conexión Y Programmación

Special functions • Fonctions spéciales
EN FR
EN - SPEEDOMETER - DISPLAY BLINKING FIAT-ALFA-LANCIA
In FIAT - ALFA - LANCIA - CITROËN Jumper '14> - PEUGEOT Boxer '14> cars, the speedometer display starts flashing
when the original car radio is removed. To avoid it, carry out the following steps, once the steering wheel controls
programming has been completed.
1) Press the PRG key 3 times, the green led will become flashing red-green/red/green.
2) Regardless of flashes colours, turn on and off (SLOWLY) three times the instrument panel and the LED will flash
yellow and red.
3) Briefly press the PRG key for 26 times, the led will flash 27 times yellow and once red.
4) Press and hold the PRG key until the LED switches off.
5) Lift the finger from the PRG key and check that the led flashes red twice and yellow 27 times.
6) Disconnect and connect the device to the power supply.
7) Remove the keys from the instrument panel, close the car and wait until all lights are switched off.
8) Turn on the car and check the correct functioning, otherwise repeat the operation from point 1).
EN - SPEEDOMETER - DISPLAY BLINKING FIAT-ALFA-LANCIA WITH UCONNECT RADIO
In FIAT - ALFA - LANCIA - CITROËN Jumper '14> - PEUGEOT Boxer '14> cars, the speedometer display starts flashing
when the original car radio is removed. To avoid it, carry out the following steps, once the steering wheel controls
programming has been completed.
1) Press the PRG key 3 times, the green led will become flashing red-green/red/green.
2) Regardless of flashes colours, turn on and off (SLOWLY) three times the instrument panel and the LED will flash
yellow and red.
3) Briefly press the PRG key for 28 times, the led will flash 29 times yellow and once red.
4) Press and hold the PRG key until the LED switches off.
5) Lift the finger from the PRG key and check that the led flashes red twice and yellow 29 times.
6) Disconnect and connect the device to the power supply.
7) Remove the keys from the instrument panel, close the car and wait until all lights are switched off.
8) Turn on the car and check the correct functioning, otherwise repeat the operation from point 1).
EN - ACTIVATION OF JEEP WRANGLER AMPLIFIER IGNITION FUNCTION
1) Press the PRG key 3 times, the green led will become flashing red-green/red/green.
2) Regardless of flashes colours, turn on and off (SLOWLY) three times the instrument panel and the LED will flash
yellow and red.
3) Briefly press the PRG key for 22 times, the led will flash 23 times yellow and once red.
4) Press and hold the PRG key until the LED switches off.
5) Lift the finger from the PRG key and check that the led flashes red twice and yellow 23 times.
6) Disconnect and connect the device to the power supply.
7) Remove the keys from the instrument panel, close the car and wait until all lights are switched off.
8) Turn on the car and check the correct functioning, otherwise repeat the operation from point 1).
23