Making The Electrical Connections; Installation - Home Depot FZP8012A/BN Guía De Uso Y Mantenimiento

1
Attaching the mounting strap to the
outlet box
Screw the mounting screws (GG) into the outside holes on the
□
mounting strap (BB).
Place the outlet box screws (FF) through the long oval holes on
□
the mounting strap (BB) and screw the outlet box screws (FF)
into the screw holes on the outlet box (not included).
□ Make sure the heads of the mounting screws (GG) are facing
out when the mounting strap (BB) is attached to the outlet box.
3
Attaching the canopy to the outlet box
□ Place the canopy (A) over the outlet box.
□ Align the heads of the mounting screws (GG) to protrude
through the large ends of the keyholes on the canopy (A).
□ Twist the canopy (A) clockwise until the heads of the mounting
screws (GG) slide into the narrow ends of the keyholes on the
canopy (A).
□ Tighten the mounting screws (GG) to secure the canopy (A).
2

Making the electrical connections

Wrap the middle of the ground wire from the fixture around the
□
ground screw (CC) on the mounting strap (BB). Use a wire
connector (AA) to connect the end of the ground wire from the
fixture to the ground wire from the outlet box.
□ Use a wire connector (AA) to connect the two white wires from
the fixture to the white wire (neutral wire) from the outlet box.
□ Use a wire connector (AA) to connect the two black wires from
the fixture to the black wire (live wire) from the outlet box.
□ Wrap the connections with electrical tape for a more secure
connection.
□ Position the wires back inside the outlet box.
5
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM