Publicidad
BLACK 1-7/8" FLAT HEAD SCREW
8 8
(1 used into a stud in your wall)
Q
J
BROWN 7/16" LARGE HEAD SCREW
(1 used into the top of your unit)
No load
S
50 lbs.
F
25 lbs.
F
B
25 lbs.
C
F
(12 used)
N
25 lbs.
A
F
25 lbs.
50 lbs.
O
(16 used)
P
IMPORTANT: This unit must be positioned against a wall.
Push the RUBBER SLEEVES (P) over the remaining METAL PINS (O). Insert the METAL PINS into the hole locations of your
choice in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (F) onto the METAL PINS.
Center a SCREW COVER (N) over the head of each visible SCREW in the ENDS (A and B)
We recommend using the SAFETY BRACKET (J) for added stability. Use a BROWN 7/16" LARGE HEAD SCREW (S) into the top
of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (Q) into a stud in your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 12
www.sauder.com/services
413678
Publicidad
