Human Touch JADE HEAT KIT Manual Del Usuario página 3

INSTALL THE CONTROL PANEL AND CONNECT THE JADE HEAT PAD
1. Install the body pad onto the chair seat and footrest, with the backrest pad folded forward onto
the seat (Fig.12).
2. Connect the transformer cable to both the control panel cable and the jade head pad cable
(the connections are color-coded), then slide the connector cover over the connections (Fig.12).
Control panel cable
Connector cover
Transformer cable
Jade head pad cable
4
Control panel
Backrest pad
Fig.13
3. Using a Phillips-head screwdriver, remove the three screws that secure the left-hand armrest cap
to the chair, then remove the armrest cap (Fig.13).
4. Place the control panel bracket on top of the armrest core (Fig.14).
5. Replace the armrest cap, then secure it using the three screws (Fig.15).
6. Reinstall body pad onto the chair.
Armrest cap
Fig.13
Control panel bracket
Fig.14
Armrest cap
Fig.15
Armrest core
5