Velleman PCMP96 Manual Del Usuario página 5

5. Overview
1. charge LED, switches off when fully loaded
2. on-off switch
3. micro USB charging port
4. brightness switch
6. Use
1. Install the iBlazr app and open it.
2. Make sure the LED flash is fully loaded. Connect
the flash to your smartphone. Set the volume to its
maximum level.
3. Switch on the flash function. Click the flash icon
on the bottom right corner of the display.
4. Set the flash brightness to its maximum level.
5. Tap the setting icon on the bottom right corner
of the display.
6. Take your picture with the middle button.
7. You can also use it as a regular light.
7. Cleaning and Maintenance
 Disconnect before cleaning.
 Do not immerse in water.
 Clean with a dry, lint-free cloth.
 Do not use any abrasive or chemical cleaning
products.
Use this device with original accessories only.
Velleman nv cannot be held responsible in the
V. 01 – 22/08/2016
PCMP96
5 ©Velleman nv