Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING YOUR STAND MIXER
SPEED CONTROL KNOB
The Speed Control Knob is located on
the right side of the Mixer (with the
front facing you), and has increments
from 1 to 10 and OFF (see Fig. 5).
To start Mixer, turn Knob clockwise
from OFF. Always start the Mixer on
the slowest possible speed to avoid
splashing ingredients out of the bowl.
When ingredients start to mix, turn
speed up as called for in recipe.
See Page 9 for Speed Control Guide.
CAUTION:
To avoid unintentional starting and possible injury or product damage
turn Speed Knob to OFF and unplug Stand Mixer when mixing is complete.
WORK LIGHT AND POWER INDICATOR LIGHT
When the Mixer is plugged in and a speed is selected, the blue LED light encircling
the Speed Knob (see Fig. 5) comes on. A Work Light also comes on to illuminate
the work area above the bowl.
When you turn the Speed Knob OFF, the blue LED Light around the Speed
Knob goes out. The Work Light stays on for 3 minutes, then shuts o .
NOTE: If you plug the Mixer in with the Speed Knob turned to any speed
setting, the mixer will not start, but the Speed Knob and Work Light LEDs will
and resume normal Mixer operation.
Fig. 5
7
Power
Indicator Light
Publicidad
Tabla de contenido
