Getting Started - Veho muvi MICRO HD Serie Manual De Instrucciones

2. Guide to controls
4 1
3
1. Record on/off button
2. LED indicator
3. Power on/off switch
4. Lanyard hole
4
2
7
5. VOX (Sound Activation) on/off switch
6. microSD slot
7. Micro USB port

3. Getting started

Charging the Muvi
Before using please ensure that the battery is fully charged. Charge the Muvi by
connecting the USB cable to your computer's USB port or a USB mains charger
5
(not included) and the micro USB jack to the micro USB port on the bottom of the
Muvi. Whilst charging the LED indicator will be red and once fully charged the red
LED will turn off. A full charge will take approximately 90 minutes.
Using the microSD card
The Muvi does not have an internal memory and therefore needs a microSD card
for recording. Gently insert the microSD card into the slot on the side of the Muvi
until the card clicks into place.
6
Please ensure that you format the microSD card before using. You may also find
that from time to time you may need to format your microSD card to remove
'invisible' memory from the card. Invisible memory can make the Muvi think that
the micro SD card is full, when it is not.
To format your microSD card insert it into the Muvi, connect your Muvi to the
computer using the USB cable and push the power switch to the 'on' position.
On a Windows operating system, enter 'My Computer' and select 'Removable
Disk'. Right click on the 'Removable Disk' and select 'Format'. On a Mac operating
system, enter 'Applications', select 'Utilities' and then select 'Disk Utility'. Choose
the correct USB drive and select 'Erase' on the tabs bar and then select 'Erase' to
start the format.
5