LANDMANN 82424 Instrucciones De Armado Y Uso

ADJUSTABLE FIREWOOD RACK
Assembly and Use
Instructions for Model:
82424
VER. 5, 7/25/2012
READ FIRST!
RULES FOR SAFE USE
• USE THE FIREWOOD RACK ONLY ON FLAT SURFACES.
• THE FIREWOOD RACK IS RECOMMENDED FOR USE ON
A HARD SURFACE SUCH AS A CONCRETE PATIO OR
GRAVEL.
• CAUTION! IF USED ON AN UNSTABLE SURFACE, THE
FIREWOOD RACK MAY TIP OVER.
• CAUTION! DO NOT DROP OR SLAM WOOD IN THE
FIREWOOD RACK.
• CAUTION! DO NOT MOVE THE FIREWOOD RACK ONCE
WOOD HAS BEEN LOADED.
PARTS LIST
PART DESCRIPTION
A TOP FRAME
B BOTTOM FRAME
C 1.5 IN. BOLT
D FLAT WASHER
E HEXNUT
Thank you for your purchase of the Adjustable Firewood
Rack. At Landmann USA, we strive to provide you with
an easy to use, easy to assemble product. Should you
have questions, issues, a defective part or if you have any
questions concerning its use, please contact us at:
customerservice@landmann-usa.com
-OR-
1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.
Landmann® Limited
Distributed by Landmann® USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2012 Landmann USA
ASSEMBLY INSTRUCTIONS
For easiest assembly, follow the assembly steps in this order.
A Phillips screwdriver and an adjustable
wrench are needed for assembly.
Assembly time: 15 minutes
POSITION FRAME
WITH HOLES OUT
QUANTITY
2
4
8
8
Assemble the side frames [ A ] and
8 STEP
1 (2) bottom frames [ B ] as shown.
Use (4) 1.5 IN. bolts [ C ], flat
washers [ D ] and hexnuts [ E ] for
each frame. Tighten bolts securely.
Assemble frames to the 2 x 4
STEP
2 lumber using nails or screws.
Extend lumber a minimum of 2 IN.
beyond the frame.
A
B
USE ANY LENGTH 2 x 4
LUMBER (NOT INCLUDED)
SECURE USING NAILS
OR SCREWS
(NOT INCLUDED)
A
D
E
EXTEND 2 x 4
MINIMUM OF
2 IN. BEYOND
FRAME
C