3. Block type: The screen displays with small blocks. When a motion
is detected in the selected blocks, the small blocks are displayed
on the screen.
PRESET: The whole screen becomes the motion
detection area.
USER...: You can manually set the motion detection area.
Use the UP/DOWN/LEFT/RIGHT Setup switch to set the
area. To erase the selected block, press the Setup switch.
In order to set the motion detection area on your own, you have to
specify the size and location for the area setting.
When ON is selected in DISPLAY, the detected motion is displayed
on the screen and the camera sends the Alarm Out signal.
You can also assign the sensitivity for motion detection.
DAY/NIGHT
❚
The DAY/NIGHT menu is used to configure the day and night
related settings for this camera. This camera can turn the IR
(Infrared) filter on or off.
26
26
CAMERA ID
IRIS
SHUTTER
AGC
MOTION DET
DAY/NIGHT
WHITE BAL
PRIVACY
SPECIAL
RS-485
EXIT
OFF
ALC...
OFF
HIGH
OFF
DAY...
ATW2
OFF
...
...
QUIT