Samsung SCC-C6453P Manual Del Usuario página 25

FLICKERLESS
This will prevent possible screen distortion due to a mismatch between the vertical
sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter
speed will be fixed to 1/120 second.

If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is
not available.
XDR
This will correct a brightness difference between different scenes for the optimal
visibility by calculating the ambient luminance contrast in a certain unit of pixels.
The higher the value is, the higher the correction level is.
DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 18)
1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of
the scene.
NIGHT : Fixed to NIGHT mode,
regardless of the scene.
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
- BURST : If set to <OFF>, the burst
signal will not be output in NIGHT mode.
- DAY NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW fi lter.
Adjusting from HIGH to LOW will cause
to switch the fi lter in a darker screen.
- DAY NIGHT DWELL TIME : Time
required to determine the fi lter switch.
- NIGHT DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the
fi lter in a darker screen.
DAY/NIGHT
WHITE BAL WHITE BAL
FOCUS MODE FOCUS MODE
ZOOM SPEED ZOOM SPEED
DISPLAY ZOOM DISPLAY ZOOM
DISPLAY P/T DISPLAY P/T
DIGITAL ZOOM DIGITAL ZOOM
DETAIL DETAIL
V-SYNC V-SYNC
AUTO AUTO
BURST
DAY NIGHT DAY NIGHT
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
NIGHT NIGHT DAY DAY
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
MASK AREA MASK AREA
English _25
AUTO
ONEAF ONEAF
[ 2 2 ] ] [
OFF OFF
OFF OFF
OFF OFF
[ [ 2 2 ] ]
INT INT
OFF
MID MID
2SEC 2SEC
MID MID
5SEC 5SEC
1 1 2 2