Description
Important Note : Always unplug the top section of the earth wire from the base wire when disassembling the housing.
Remember to plug the top and bottom back together when reassembling the housing.
Warning
- The installation and calibration must be carried out by highly skilled
personnel.
- Do not open there may be a risk of electric shock.
Use only for the following temperature conditions: from (-10) to (+50) °C.
Do not use with voltages different from the ones specified.
Temper Glass
a
Super high power IR LED with refractor
b
IR Board and IR Board Bracket
c
IR Control Board
d
IR Light VR : Adjust VR from 70% min. to 100% max.
e
Ground Wire
f
Cable conduit
g
AC Power Cable
h
Terminal block :
i
110 - 230 V~ external power input
Terminal block : To power supply unit
j
Fuse Holder : With 250V/3.15A fuse
k
Live : Brown wire
l
Earth : Yellow/Green wire
m
Neutral : Blue wire
n
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician.
Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's
specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so
by the instructions. All Legrand products must be opened and repaired exclusively by personnel
trained and approved by Legrand. Any unauthorised opening or repair completely cancels all
liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
330 mm