Control Panel; Fan Speed - Uline H - 8651 Manual Del Usuario

• Never use cord as a handle or otherwise yank, strain
or stretch power cord.
• While unit is plugged in, do not insert or allow
foreign objects to enter any opening possibly
causing risk of electric shock, fire or damage to unit.
• A loose fit between wall outlet and plug may cause
overheating and distortion of the plug. Discontinue
use of product in this outlet. Contact a qualified
electrician to replace loose or worn outlets.
• Unit has a polarized plug (one blade wider than
the other) to reduce risk of electrical shock. Plug is
intended to fit in a polarized outlet only one way.
Do not attempt to defeat this safety feature.
5
4
AUTOMATIC LIGHT DIMMING
After a short period of time, control panel illumination
will dim to not interfere with room lighting. Ideal for
darker rooms. Press any button to re-illuminate panel.

FAN SPEED

Choose one of four fan speed settings, press "+" to
increase speed. Press "–" to lower speed. LED display will
indicate selected speed.
PAGE 2 OF 18
SAFETY CONTINUED

CONTROL PANEL

1
2 3
• Before moving, repositioning, servicing, cleaning
and when not in use, turn off power and unplug.
• To disconnect from outlet, grasp and pull only the
plug. Also, power off and unplug if unit will be left
unattended for an extended period of time or
during electrical storms.
• Clean regularly, only as described in these
instructions.
• Prior to cleaning, turn off power and unplug.
• Do not use gasoline, thinners, solvents, ammonia
or other chemicals for cleaning. Refer to cleaning
instructions in the Maintenance section on page 5.
• Do not open housing while unit is plugged in.
1. Power – To turn on or off, press the power button.
6
2. Fan Speed – Four fan speed settings: select Low,
Medium, High or Quick Clean.
3. Automatic Dust Sensing Mode – Advanced
technology reads amount of particles in air and
adjusts fan speed accordingly.
4. Sleep Mode Setting – Senses no light or low light
conditions and automatically adjusts to low speed.
5. Carbon Filter Replacement – Indicator light shows
when to change carbon filters. H-8652 replacement
carbon filter can be purchased.
6. HEPA Filter Replacement – Indicator light shows
when to change HEPA filters. H-8653 replacement
HEPA filter can be purchased.
OPERATION
NOTE: Dust and allergens are most airborne
when people and pets are active in room. For
best results, set unit on a higher speed setting
during these times for high demand cleaning
and circulation. Set to a lower setting for quieter
operation when activity is reduced.
0721 IH-8651