Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
R
3
35
Step 1:
Insert arms (#2 and #3) to the support brace (#4), fasten
them by using bolts (#5) and steel washers (#8). Keep the
bolts loose. See Figure 2.
Note:
The labels marked "L" and "R" on arms (#2 and #3) should
coincide with Figure 2 to ensure proper assembly.
FIGURE 4
7
Step 3:
At the back of the chair, fasten the seat assembly (#1) to
arms (#2 and #3) by using bolts (#7). See Figure 4.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents
on the frame parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off
season periods.
Warranty
• This product is covered by Courtyard Creations Inc. 3 years limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
V-4
L
2
4
#5 BOLT M6*35
1
2
35
#7 BOLT M6*35
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
STOP
FIGURE 3
8
5
Step 2:
Place the right arm (#3) onto a non-abrasive surface, such as
a carpet. At the front of the chair, fasten the seat assembly (#1)
to arms (#2 and #3) by using bolts (#6). Keep the bolts loose.
See Figure 3.
FIGURE 5
3
Step 4:
Tighten bolts on the seat assembly (#1). Make sure that all
of the bolts have been tightened completely. You can adjust
the leveler on arms (#2 and #3) to keep the chair even when
it is not stable. See Figure 5.
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
DON'T RETURN TO STORE!
PAGE 2 OF 2
2
1
6
6
3
15
#6 BOLT M6*15
Publicidad
