Clock And Timers - Lenco DAR-051 Manual De Usuario

Rotate the Volume knob counter-clockwise to decrease the volume.
The display will show the volume setting.
Mute function
Pressing the MUTE button on
the display. Press this button again to cancel the mute function.

Clock and Timers

Setting the clock and date
After the unit is plugged into a mains supply or after a power failure, the time and date on the LCD display will
blink. The unit should be in standby mode to set the clock.
1. Press CLOCK button,
2. Press / to select "24H" or "12H", Press ENTER confirm, the hour digits on the display will blink.
3. Press / to set the hour, press ENTER confirm, the minutes digits on the display will blink.
4. Press / to set the minutes, press ENTER confirm, the Year digits on the display will blink
5. Press / to set the Year, press ENTER confirm, the Month digits on the display will blink.
6. Press / to set the Month, press ENTER confirm, the Day digits on the display will blink.
7. Press / to set the Day, press ENTER confirm. Press
Setting Alarm
Note: Check that the radio has the correct time and date before you set an alarm.
This unit may be used as an alarm clock. The CD/USB device or DAB/FM radio/Buzzer is activated to play at a
preset time.
1. Press POWER to switch the unit to standby mode.
2. Make sure that you have set the clock correctly.
3. Press the ALARM button to set alarm 1; press ALARM button twice to set alarm 2
4 . "Alarm 1 (or 2) Setup" is displayed. Press ENTER button to select.
"Alarm 1 (or 2) Setup
5 .
6 . Press / repeatedly to set hour. Press ENTER to confirm.
7 . Press / to set minute, Press ENTER to confirm.
8 . Press / select the Alarm volume from 0 to 30. Press ENTER to confirm.
9 . Press / to scroll to choose
1 0. Press / to choose the duration for the alarm. You can choose from 10 to 60 minutes. Press the ENTER
button to confirm. Use
1 1. The display will show the current time and Alarm 1 (or Alarm 2 or at the same time)
Warning: When alarm is set to DAB mode and there is no DAB signal, the alarm clock is silent.
Snooze
1. Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short period of
approximately 9 minutes, by pressing the "SNOOZE" key once.
2. The alarm (alarm 1, alarm 2) will then automatically sound again after approximately 9 minutes have
passed.
The "Zz" symbol will show on the display to remind that the snooze function is active.
3.
4. To deactivate the snooze, press and release the "POWER" key.
Sleep Timer
1. Repeatedly press the SLEEP button, you can choose between 90/80/70/60/50/40/30/20/10 minutes.
After this time, the unit will go to standby mode. This is useful for falling asleep to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP until OFF appears on the display
Display Backlight
remote control will mute the volume is muted.
"clock setup" is displayed, press ENTER to confirm.
On time" is displayed and the hour digits for the alarm will flash.
OFF/USB/CD/FM/DAB/BUZZER. Press ENTER to confirm.
/ to select YES and press ENTER to save
- EN 10 -
"Volume Muted"
/ the select save "YES/NO"
the alarm setting.
will appear on