SAFety iNStruCtioNS
■
Always read the safety instructions carefully.
■
keep this user Manual for future reference.
■
keep this equipment away from humidity.
■
Lay this equipment on a reliable flat surface before setting it up.
■
the openings on the enclosure are for air convection hence protects the
equipment from overheating. do not cover the openings.
■
Make sure the voltage of the power source is at 0/220V before connect-
ing.
■
Place the power cord such a way that people can not step on it. do not place
anything over the power cord.
■
Always unplug the Power Cord before inserting any add-on card or module.
■
All cautions and warnings on the equipment should be noted.
■
Never pour any liquid into the opening that can cause damage or cause elec-
trical shock.
■
if any of the following situations arises, get the equipment checked by service
personnel:
○
the power cord or plug is damaged.
○
Liquid has penetrated into the equipment.
○
the equipment has been exposed to moisture.
○
the equipment does not work well or you can not get it work according
to user Manual.
○
the equipment has been dropped and damaged.
○
the equipment has obvious sign of breakage.
■
do Not LeAVe tHiS eQuiPMeNt iN AN eNViroNMeNt uNCoNdi-
tioNed, StorAGe teMPerAture ABoVe 60°C (40°F), it MAy dAM-
AGe tHe eQuiPMeNt.
teCHNiCAL SuPPort
if a problem arises with your system and no solution can be obtained from the
user's manual, please contact your place of purchase or local distributor. Alterna-
tively, please try the following help resources for further guidance.
■
Visit the MSi website for technical guide, BioS updates, driver updates, and
other information: http://www.msi.com/service/download
■
Contact our technical staff at: http://support.msi.com
MS-7788
3