Publicidad
Idiomas disponibles
Idiomas disponibles
Cool and dry and without corrosive gas,it should not be installed close to
heat sources or directly under the sunlight.The space more than
10cm,between the wall of the front and the back of the refrigerator should be
allowed. When installing, the universal wheels should be padded well. So as
to make the refrigerator be level and stable, or it will cause vibration and too
much noise.
3. When initial operation, the refrigerator should run emptily about one hour
before storing food in it
4. Temperature inside the refrigerator could be adjusted by the themostat,
when you turn the knob in clockwise.The bigger the figure, the lower the
temperature. Generally, the position or "3-4" is suitable. "0" position stands
for stopping operation "6" position will be operating continuely.
5. To save energy, the door should not be frequently opened or left open for a
long time.
6. The surface and the inside of the refrigerator should be dry and clean.
Long time moisture will cause the refrigerator rust slowly. (There will be
some stains on the surface)
7. Periodical clean is suggested for your reference. Generally, 30-45 days
once is best. When cleaning, it is best to wipe the inside and the surface of
the refrigerator with the soft cloth ok in neutral soapsuds or detergent.
Caution: To ensure safety, the power plug must be pulled out before cleaning.
Publicidad
