3M Speedglas 9100 Serie Manual De Instrucciones

3
Speedglas
™
9100 Series Knob and Pivot Kit
** Refer to 9100, 9100FX, 9100-Air, 9100FX-Air Helmet
Complete User's Instructions for List of Product Warnings
Trousse de bouton et de pivot pour masques de série 9100
** Consulter les directives d'utilisation des masques 9100,
9100FX, 9100-Air et 9100FX-Air pour connaître les mises en
garde relatives aux produits.
Perilla Serie 9100
** Remítase a las Instrucciones de las Caretas 9100, 9100-Air y
9100FX-Air para consultar las advertencias relacionadas con el
producto.
3M Occupational Health and
Environmental Safety Division
3M Center, Building 0235-02-W-70
St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2012. All rights reserved.
3M and Speedglas are trademarks of 3M, used under license in Canada.
3M Occupational Health
and Environmental Safety Division
3M Canada Company
P.O. Box 5757 London, Ontario N6A 4T1
Printed in U.S.A.
© 3M 2012. All rights reserved.
3M and Speedglas are trademarks of 3M, used under license in Canada.
Division des produits d'hygiène
industrielle et de sécurité
environnementale de 3M
Compagnie 3M Canada
C.P. 5757
London (Ontario) N6A 4T1
Imprimé aux É.-U.
© 3M, 2012. Tous droits réservés.
3M et Speedglas sont des marques de commerce de 3M, utilisées sous licence au Canada.
3M México S.A. de C.V.
Av. Santa Fe No. 190
Col. Santa Fe, Del. Álvaro Obregón
México D.F. 01210
Impreso en EUA
© 3M 2012. Todos los derechos reservados.
3M y Speedglas son marcas comerciales de 3M Company, usadas bajo licencia en Canadá.
06-0400-52
Welding Helmets
Friction
The welding helmet has two adjustment knobs, with two different functions, working independent of
one another. The right side knob is for the friction adjustment when raising and lowering the helmet.
Turning the right side knob clockwise will increase the friction when raising or lowering the helmet
in normal welding operations. See "Parking Position" section for adjustment and operation of the left
pivot knob.
Parking Position
The welding helmet has two adjustment knobs, with two different functions, working independent
of one another. The left side knob adjusts the holding force for the "parking position" for when the
helmet would remain in the raised position during extended set-up operations, or other tasks. Turning
the left knob clockwise increases the holding force of the parking position.
Note: Over-tightening the left knob will cause the parking position to not function properly. See
"Friction" section for adjustment and operation of the right pivot knob.
98-0060-0209-5
34-8709-2304-1
FOR MORE INFORMATION
In United States, contact:
Website: 3M.com/PPESafety
Technical Assistance: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or
1-651-737-6501
RENSEIGNEMENTS SUPPLÉMENTAIRES
Aux États-Unis :
Internet : 3M.com/PPESafety
Assistance technique : 1 800 243-4630
Autres produits 3M :
1 800 364-3577 ou 1 651 737-6501