Installing A Hard Drive - Zotac B150 Mining ATX Guia De Inicio Rapido

Installing optical drives or other 5 ¼-inch device
1. Locate the 5 ¼-inch drive bay on the case and remove the cover.
2. Insert optical drive or 5 ¼-inch device into the drive bay and secure with screws.

Installing a hard drive

1. Locate the internal 3 ½-inch drive bay inside the case.
2. Insert hard drive into the drive bay and secure with screws.
Connecting SATA and IDE devices
1. Locate the SATA or IDE connector on the motherboard.
2. Connect SATA or IDE cable to respective connectors
3. Connect other end of SATA or IDE cable to corresponding SATA or IDE device.
Note: Up to two IDE devices can be connected with one cable.
DVD-ROM SATA
IDE CABLE HDD DRIVE
6