Replacing The Interior Light Bulb; Defects Finding Guide - Beko HSA 47520 Instrucciones Para El Uso

EN

Replacing the interior light bulb

If the lamp burns out, disconnect the
appliance from the mains. Take out the
lamp trim. Make sure the lamp is
screwed correctly. Plug in the appliance
again. If the lamp still does not go on,
replace it with another one model E14 -
15W. Mount back the lamp trim in its
place.
The lamp(s) used in this appliance is not
suitable for household room illumination. The
intended purpose of this lamp is to assist the
user to place foodstuffs in the
refrigerator/freezer in a safe and comfortable
way.
The lamps used in this appliance have to
withstand extreme physical conditions such as
temperatures below -20°C.
N o i s e s d u r i n g o p e r a t i o n
In order to keep the temperature at the value
you have adjusted, the compressor of the
appliance starts periodically.
The noises which can be heard in such
situation are normal.
They are redced as soon as the appliance
reaches the operation temperature.
The humming noise is made by the
compressor. It can become a little stronger
when the compressor starts.
The bubbling and gurgling noises coming from
the refrigerant circulating in the pipes of the
appliance, are normal operating noises.
W a r n i n g !
Never try to repair yourself the appliance
or its electric components. Any repair
made by an unauthorised person is
dangerous for the user and can result in
the warranty cancellation.

Defects finding guide

T h e a p p l i a n c e d o e s n o t w o r k .

There is a power failure.
 The plug of the supply cord is not inserted
well into the socket.
 The fuse is blown.
The thermostat is in „OFF" position.

T h e t e m p e r a t u r e s a r e n o t l o w
e n o u g h ( r e d L E D o n ) .
 The food prevents the door closing.

The appliance was not placed correctly.
 The appliance is placed too close to a heat
source.

The thermostat knob is not in the correct
position.
E x c e s s i ve i c e b u i l d - u p
The door was not closed properly.

T h e i n s i d e l i g h t i n g d o e s n o t w o r k

The lamp is blown. Unplug the appliance
from the mains, take out the lamp and
replace it with a new one.
T h e f o l l o w i n g a r e n o t d e f e c t s
 Possible noddings and cracks coming
from the product: circulation of the
refrigerant in the system.
The symbol
packaging indicates that this product may
not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative
environment and human health, which
could otherwise be otherwise be caused
by inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your
household waste disposal service or the
shop where you purchased the product.
6
Instruction for use
on the product or on
consequences
local city office,
for the
you