STAR Water Systems 3SEHL Guía De Referencia Rápida

QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL FOR
COMPLETE DETAILS.
Toll Free Help Line
1-800-742-5044
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
2. Install rigid 1-1/2 in. discharge pipe, union, check
valve according to code.
4. Connect pump power supply to a
GFCI-protected receptacle.
© 2020. All rights reserved.
SUBMERSIBLE
SUMP PUMP
MODEL 3SEHL, 412082,
S1057, S1098, 451549
1-1/2-in
Discharge
pipe
Check valve
GFCI outlet
18 in.
1. Place pump in a sump basin that is at least 12 in. wide
and 18 in. deep.
Additional
3/16-in
Vent hole
3. Drill a 3/16 in. hole in the discharge pipe, level with the
top of pump. Pumps have a vent located in the pump,
but an additional vent hole is recommeded. Connect
remaining discharge pipe into main discharge line.
Fill with
water
5. Fill the basin with water to check operation.
Install a basin cover and gasket on top of
the basin.
12 in.
Vent hole
located in
the pump
housing
Basin cover
SW1618 A