Patient Instructions - Bort DynamicFX Manual Del Usuario

GB
Functionality and effect:
 Counteraction of the kyphosis in the thoracic spine area by activating the torso muscles.
 Improves posture and brings pain relief by dynamically straightening the lumbar spine and thoracic
spine.
 R elief and clearing of lordosis of the lumbar spine.
 Improvement of the body posture and strengthening of the muscles.
 S tabilisation of the achieved straightening.
 P ain reduction in the overstressed back muscles.
 Increase in mobility via a reduction in pain.
 Lower risk of falling due to an improvement of the statics of the body.

Patient instructions:

Special information:
Please ensure that you have the fit and the functionality of the BORT DynamicFX Back brace regularly
checked by your orthopaedic technician. It is especially important to inspect the length of the shoulder
straps and the base plate and to have these components readjusted if necessary, particularly when
starting treatment with the BORT DynamicFX Back brace.
Step 1
The BORT DynamicFX Back brace that has been tailor­made for you and has
been adapted by the orthopaedic technician is pulled over the shoulders in the
same way as a backpack. In doing so, the base support is open. Please ensure
that the shoulder straps are not twisted.
Step 2
Close the base support with as much tension as possible. In order to be able
to close the base support with as little effort as possible, please use the hand
loops that are attached to the closure plates of the base support. When closing,
ensure that the base support is positioned above the groin and does not push
in an unpleasant manner when sitting. Both of the base support fasteners must
be connected to each other in a parallel manner.
Step 3
Now pull both of the side bracing elements forwards in an even manner and
secure them onto the base support.
Step 4
Then close your BORT DynamicFX Back brace chest strap.
7