DeWalt D518008 Guia De Inicio Rapido página 2

13. Liberally apply supplied grease to the inner and outer exhaust
o-rings before assembling the top cap and gasket.
14. Replace gasket. Be sure to orient
gasket in the proper direction.
15. With a gentle turning
assemble top cap onto engine and
frame. The cap should slide easily. If
not, remove cap and reassemble.
FIG. 1
FIG. 1
PART #
PIÈCE N°
PIEZA N°
N041302
PART #
PIÈCE N°
PIEZA N°
N023142
648243-00
motion,
PART #
PIÈCE N°
PIEZA N°
390146-00
PART #
PIÈCE N°
PIEZA N°
608611-00
16. Push downward to fully seat cap of frame.
17. Replace and tighten top cap screws.
18. Tighten screws snugly to prevent leaks.
19. Ensure trigger and contact trip are working smoothly.
20. Set pressure on compressor or air line at 80 psi.
21. Pointing tool in safe direction, connect tool to air supply. Tool
must not leak air.
22. Check for proper operation of tool. If tool continues to leak
air or if problems persist, take nailer to a D
center.
23. If warning labels are missing or damaged, request free
replace ments from a D
PART #
PIÈCE N°
PIEZA N°
390156-00
PART # / PIÈCE N° / PIEZA N°
N041301
2
WALT service
E
WALT service center.
E
PART #
PIÈCE N°
PIEZA N°
N025479
PART #
PIÈCE N°
PIEZA N°
N041303